Innova Classic

Product Codes

INC-SET (Innova Classic Interface + Power Controller)
INC-S (Innova Classic Interface)
INP-C (Power Controller)
———–
INC-B (Innova Classic Built-in)
———–
INC-B-C (Innova Classic Built-in with Combi Feature)

Technical Data

Description Power Rating Remarks
Control
Rated Power 3 Phases
15kW AC1 (3x5kW)
Rated Voltage 3 Phases
400V 3N~
Rated Power Single Phases
9kW AC1
Rated Voltage Single Phases
230V 1N~
Frequency
50/60Hz
Switching capacity per phase
21A
Sauna temperature range
40-110°C
Maximum session time(preset)
4,6,12,18,24h
Restrictions apply according to IEC/EN 60335-2-53
Dimensions INNOVA S types
User Interface
(W) 180 x (H) 105 x (D) 31
Power Controller
(W) 265 x (H) 245 x (D) 75
Dimensions INNOVA B types
(W) 265 x (H) 245 x (D) 75
Weight INNOVA S types
User Interface
150g (Touch)
Power Controller
1500g
Weight INNOVA B types
1630g(Touch)
Rated Power 3 Phases
5kW AC1
Rated Power Single Phases
3kW AC1
Rated Voltage
230V 1N~
Switching capacity
21A(3 Phases), 13A (1 Phase)
Maximum sauna temperature for steamer operation
80°C or *55°C
*Depending on the type of Sensor 2.
Automatic water filling
Optional
Automatic drain valve
Optional
Cabin Light
Rating
230V 1N~,100W AC1
Fan
Optional (with speed control)
Rating
230V 1N~,0.5A
Power Extension Unit
Additional Power expansion to maximum of 30kW
Rated Power 3 Phases
15kW AC1(3x5kW)
Rated Voltages 3 Phases
400V 3N~
Frequency
50/60Hz
Switching capacity per phase
21A
Sensor
Bench Temperature Sensor
Bench Sensors
Bench Temperature Sensor
Optional
Bench Combined Temperature –
Humidity Sensor
Optional

Separate control unit

Innova Classic control unit consists of a separate control panel and a power controller which can handle power up to 15 kW. It is packed with features such as door sensor, pre-timer, smart energy-saving and steady and even power distribution! It has a clear LED-display and seven buttons for easy use. Temperature sensor with over-heat fuse and 4 m connection cable are included in the package.

Separate Innova Contactor Unit is required when heater power is exceeding 15 kW.

Built-in control unit

Innova Classic built-in control unit consist of power controller with integrated control panel. It is equipped with the same features than Innova Classic separate control unit. The only difference is that all comes in one neat package!

Separate Innova Contactor Unit is required when heater power is exceeding 15 kW.