Innova Classic 2.0

Product Codes

INC-SET-V2 (Innova Classic 2.0 Interface + Power Controller)
INC-S-V2 (Innova Classic 2.0 Interface)
INP-C (Power Controller)

Technical Data

Description Power Rating Remarks
Control
Rated Power 3 Phases
15kW AC1 (3x5kW)
Rated Voltage 3 Phases
400V 3N~
Rated Power Single Phases
9kW AC1
Rated Voltage Single Phases
230V 1N~
Frequency
50/60Hz
Switching capacity per phase
21A
Sauna temperature range
40-110°C
Maximum session time(preset)
4,6,12,18,24h
Restrictions apply according to IEC/EN 60335-2-53
Dimensions Innova 2.0
User Interface
(W) 104 x (H) 147 x (D) 1.5
Power Controller
(W) 265 x (H) 245 x (D) 75
Weight INNOVA S types
User Interface
150g (Touch)
Power Controller
1500g
Rated Power 3 Phases
5kW AC1
Rated Power Single Phases
3kW AC1
Rated Voltage
230V 1N~
Switching capacity
21A(3 Phases), 13A (1 Phase)
Maximum sauna temperature for steamer operation
80°C or *55°C
*Depending on the type of Sensor 2.
Automatic water filling
Optional
Automatic drain valve
Optional
Cabin Light
Rating
230V 1N~,100W AC1
Fan
Optional (with speed control)
Rating
230V 1N~,0.5A
Power Extension Unit
Additional Power expansion to maximum of 30kW
Rated Power 3 Phases
15kW AC1(3x5kW)
Rated Voltages 3 Phases
400V 3N~
Frequency
50/60Hz
Switching capacity per phase
21A
Sensor
Bench Temperature Sensor
Bench Sensors
Bench Temperature Sensor
Optional
Bench Combined Temperature –
Humidity Sensor
Optional

Innova Classic 2.0 is another selection of Innova control user interface.

The look is altered but the functions are all similar to the previous version of the classic user interface.

The Innova control unit set is with a user interface, power controller, temperature sensor, and cable connector. Innova Classic 2.0 can support power until 15kW. A Contactor Unit is needed if the power exceeds 15kW.